Whale Orca Automatic Electric Bilge Pump IC 24 Pump IC 24V
£157.54
Out of stock
Product Number
4020189
Whale Orca Automatic Electric Bilge Pump IC 24 Pump IC 24V
The Orca Auto 1300 is the new addition to the IC bilge range of intelligently controlled pumps from Whale.
The compact and powerful automatic Orca Auto 1300 requires no additional field sensor or float switch rather they are integrated within the pump to ensure the most effective automatic bilge water removal. The submersible pump has a large footprint ensuring lowest water level detection and maximum surface area exposure to bilge water.
- High performance- 1300 US gals/hr flow rate (82 ltrs/min)
- Simple to install-built in Automatic sensor—no need to fit a separate bilge switch
- Efficient - Large filter- maximum surface area exposed to bilge water
- Solid state switching—no moving parts
- Low amp draw
- Neat fit in compact bilge areas
- Unaffected by wave motion
Nominal Voltage: 24V d.c.
Open Flow Rate: 1300 US GPH (82 l/min)
Flow rate at 1m (3ft) head: 1100 GPH (65 l/min)
Current Draw: 2.5 Amps
Recommended Automotive Fuse Size: 5 Amp
Weight: 0.9 kg (2lbs)
Hose Connection: Stepped ports 1" and 1 ?"
Wire Size: 16 AWG x 1m (3ft)
Maximum Discharge Head: 4.5m (14.8ft)
Overall Height: 129mm (5.1")
Overall Width: 168mm (6.6")
Overall depth: 121mm (4.8")
Materials:
Pump Body- ABS,
Seals: Nitrile®,
Impeller: Acetal
The Orca Auto 1300 is the new addition to the IC bilge range of intelligently controlled pumps from Whale.
The compact and powerful automatic Orca Auto 1300 requires no additional field sensor or float switch rather they are integrated within the pump to ensure the most effective automatic bilge water removal. The submersible pump has a large footprint ensuring lowest water level detection and maximum surface area exposure to bilge water.
- High performance- 1300 US gals/hr flow rate (82 ltrs/min)
- Simple to install-built in Automatic sensor—no need to fit a separate bilge switch
- Efficient - Large filter- maximum surface area exposed to bilge water
- Solid state switching—no moving parts
- Low amp draw
- Neat fit in compact bilge areas
- Unaffected by wave motion
Nominal Voltage: 24V d.c.
Open Flow Rate: 1300 US GPH (82 l/min)
Flow rate at 1m (3ft) head: 1100 GPH (65 l/min)
Current Draw: 2.5 Amps
Recommended Automotive Fuse Size: 5 Amp
Weight: 0.9 kg (2lbs)
Hose Connection: Stepped ports 1" and 1 ?"
Wire Size: 16 AWG x 1m (3ft)
Maximum Discharge Head: 4.5m (14.8ft)
Overall Height: 129mm (5.1")
Overall Width: 168mm (6.6")
Overall depth: 121mm (4.8")
Materials:
Pump Body- ABS,
Seals: Nitrile®,
Impeller: Acetal
Write Your Own Review