Whale Gulper 320 12V
£240.91
Out of stock
Product Number
4020174
✕
The guide to finding your perfect size
We understand how important it is to find the right clothing sizes when making a purchase from our website.
Whale Gulper 320 12V
High Capacity Waste Pump- Fast Drainage and space saving on board
No clog, no filter waste pump built on more than a decade of market leading pump technology
Gulper 320 - the easy access remote mount bilge pump designed to be located high, dry and protected - ideal where bilge space is very limited.
- Ideal where bilge space is limited-smallest footprint strainer
- IHead rotates 360 degrees to suit your installation
- IHigh- dry and protected - Remote mounting allows easy access
- ILong life- runs dry without damage
- IMeets requirement for primary bilge pump for boats up to 12m (39.4ft) length
- IEasy to install - including uneven surfaces
- ISecure fit -new wrap around mounting feature, only 3 screws to secure
- IReliable operation - Self priming
- IEasy maintenance -patented reinforced Ezi-clamp locking ring -simply twist and screw to lock pump head in desired position
Voltage: 12 V d.c..
Hose Connections: 3/4" (19mm) + 1" (25mm)
Recommended Fuse Size: 10 Amp Automotive
Minimum Wire Size: 1.5 mm2 (16 AWG)
Weight: 1.6 kg (3.5 lbs)
Materials Pump Head: Glass-filled Nylon: Valves and Diaphragm: Santoprene®
Accessories: SB3422 (19mm) strainer (multi-directional port)
Service Kit: AK2050 - replacement pump head
Maximum Suction Lift: 3m (10ft)
Maximum Discharge Head: 3m (10ft)
Maximum Discharge Head and Suction Lift Combined: 4m (13.5ft)
Perfomance -typical:
Suction Lift: 1m (3ft)
Discharge Head: 1m (3ft)
Hose Size: 3/4" (19mm)
Flow Rate per Minute: 17.4 ltrs (4.5 US Gals)
Current Draw: 7.5 amps (12 V.d.c.)
High Capacity Waste Pump- Fast Drainage and space saving on board
No clog, no filter waste pump built on more than a decade of market leading pump technology
Gulper 320 - the easy access remote mount bilge pump designed to be located high, dry and protected - ideal where bilge space is very limited.
- Ideal where bilge space is limited-smallest footprint strainer
- IHead rotates 360 degrees to suit your installation
- IHigh- dry and protected - Remote mounting allows easy access
- ILong life- runs dry without damage
- IMeets requirement for primary bilge pump for boats up to 12m (39.4ft) length
- IEasy to install - including uneven surfaces
- ISecure fit -new wrap around mounting feature, only 3 screws to secure
- IReliable operation - Self priming
- IEasy maintenance -patented reinforced Ezi-clamp locking ring -simply twist and screw to lock pump head in desired position
Voltage: 12 V d.c..
Hose Connections: 3/4" (19mm) + 1" (25mm)
Recommended Fuse Size: 10 Amp Automotive
Minimum Wire Size: 1.5 mm2 (16 AWG)
Weight: 1.6 kg (3.5 lbs)
Materials Pump Head: Glass-filled Nylon: Valves and Diaphragm: Santoprene®
Accessories: SB3422 (19mm) strainer (multi-directional port)
Service Kit: AK2050 - replacement pump head
Maximum Suction Lift: 3m (10ft)
Maximum Discharge Head: 3m (10ft)
Maximum Discharge Head and Suction Lift Combined: 4m (13.5ft)
Perfomance -typical:
Suction Lift: 1m (3ft)
Discharge Head: 1m (3ft)
Hose Size: 3/4" (19mm)
Flow Rate per Minute: 17.4 ltrs (4.5 US Gals)
Current Draw: 7.5 amps (12 V.d.c.)
Write Your Own Review