WAECO CU-55/VD-07 Boxkit CU55+VD07 Cooling Kit for Cooler Waters
£789.00
Out of stock
Product Number
3120048
WAECO CU-55/VD-07 Boxkit CU55+VD07 Cooling Kit for Cooler Waters 130L max 12/24V - Package 2
CU-55 Compressor & VD07 is an entry-level unit for small refrigeration capacities and for use in cool waters
The Waeco CU55 & VD07 cooling kit for use in cool waters from Dometic allows conversion of locker into a fridge using this DIY cooling kit.
The kit consists of a compressor and an "O" shaped cooling plate, suitable for a coolbox volume of 100 litres max and a thermostat switch.
Key Features:
- Suitable for solar operation
- For refrigerator capacities up to approx. 130l and for use in cool waters
- Dynamically ventilated wire tube condenser
- With corrosion-resistant stainless steel mounting plate
- 230-volt connection with low-priced mains adapter
The Danfoss compressor features:
- Integrated low voltage protection.
- Low voltage cut-out.
- Stainless steel mounting plate.
- It has self-sealing valve couplings.
- Air cooled.
CU55
- Cooling capacities: 130 litres max. for normal refrigeration with direct evaporators, 100 litres max. with cold accumulators
- Voltage: 12/24 volts DC
- Power input: approx. 35 or 40 watts, depending on the evaporator type
- System: Fully hermetic compressor with control electronics and integrated low-voltage protection, low-voltage cut-off, electronic reverse pole protection, dynamically ventilated wire tube condenser, self-sealing valve couplings
- Dimensions (WxHxD): 220mm x 160mm x 220mm
- Weight: approx. 6.5 kg
- Suitable for floor mounting, corrosion-resistant stainless steel mounting plate
VD-07 Evaporator plate:
- O-evaporator for installation in chest and upright refrigerators
- Cooling capacities: 100 litres max. with an insulation of 35 mm PU, 130 litres max. with an insulation of 50 mm PU
- Power input: approx. 35 watts
- Current consumption: 1.46 Ah/h with 35 mm PU insulation, 1.17 Ah/h with 50 mm PU insulation, both at +5°C interior temperature, +32°C ambient temperature and medium cooling capacities
- System:
Standard O-evaporator for horizontal or vertical installation,
Self-sealing valve couplings, flexible connection pipe approx. 2 m,
Continuously variable thermostat (for external installation, with blue turning knob and LED indicator, white plastic housing),
Electric supply cord approx. 3 m
Dimensions (WxHxD): 255 x 210 x 100 mm
Weight: approx. 1.5 kg
CU-55 Compressor & VD07 is an entry-level unit for small refrigeration capacities and for use in cool waters
The Waeco CU55 & VD07 cooling kit for use in cool waters from Dometic allows conversion of locker into a fridge using this DIY cooling kit.
The kit consists of a compressor and an "O" shaped cooling plate, suitable for a coolbox volume of 100 litres max and a thermostat switch.
Key Features:
- Suitable for solar operation
- For refrigerator capacities up to approx. 130l and for use in cool waters
- Dynamically ventilated wire tube condenser
- With corrosion-resistant stainless steel mounting plate
- 230-volt connection with low-priced mains adapter
The Danfoss compressor features:
- Integrated low voltage protection.
- Low voltage cut-out.
- Stainless steel mounting plate.
- It has self-sealing valve couplings.
- Air cooled.
CU55
- Cooling capacities: 130 litres max. for normal refrigeration with direct evaporators, 100 litres max. with cold accumulators
- Voltage: 12/24 volts DC
- Power input: approx. 35 or 40 watts, depending on the evaporator type
- System: Fully hermetic compressor with control electronics and integrated low-voltage protection, low-voltage cut-off, electronic reverse pole protection, dynamically ventilated wire tube condenser, self-sealing valve couplings
- Dimensions (WxHxD): 220mm x 160mm x 220mm
- Weight: approx. 6.5 kg
- Suitable for floor mounting, corrosion-resistant stainless steel mounting plate
VD-07 Evaporator plate:
- O-evaporator for installation in chest and upright refrigerators
- Cooling capacities: 100 litres max. with an insulation of 35 mm PU, 130 litres max. with an insulation of 50 mm PU
- Power input: approx. 35 watts
- Current consumption: 1.46 Ah/h with 35 mm PU insulation, 1.17 Ah/h with 50 mm PU insulation, both at +5°C interior temperature, +32°C ambient temperature and medium cooling capacities
- System:
Standard O-evaporator for horizontal or vertical installation,
Self-sealing valve couplings, flexible connection pipe approx. 2 m,
Continuously variable thermostat (for external installation, with blue turning knob and LED indicator, white plastic housing),
Electric supply cord approx. 3 m
Dimensions (WxHxD): 255 x 210 x 100 mm
Weight: approx. 1.5 kg
Write Your Own Review