Rule Mate 1100

Rule Mate 1100
The rule-mate consists of a powerful rule bilge pump and a new non-mercury float switch in a single housing. The pumps are available in three capacities - 500 GPH, 750 GPH, and 1100 GPH. While fully automated, the pump will only turn on when the water level rises. There is no cycling and battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The pumps's internal computer senses no load (water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. The rule-mate bilge pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications.Specifications::
• Compact pump for smaller vessels.
• Tough plastic body.
• Quick release inlet strainer allows rapid cleaning.
• Low amp draw conserves batteries.
• Ignition protected.

Voltage: 12 Vdc
Amp Draw: 3.3 amp
Fuse Size: 5.0 amp
Height: 101.6 mm (4 inches)
Width: 127 mm (5 Inches)
Weight: 400 g (14 oz)